AZ761_14 Datasheet, PDF (3/3 Pages) ZETTLER Electronics – 12 A SPDT MINIATURE POWER RELAY

AZ761
RELAY ORDERING DATA
DC COIL SPECIFICATIONS – SENSITIVE COIL
ORDER NUMBER*
Nominal Coil
VDC
5
Must Operate
VDC
3.8
Max. Continuous
VDC
13.0
Coil Resistance
Ohm ± 10%
100
1 Form A
AZ761–1A–5DS
1 Form C
AZ761–1C–5DS
6
4.5
15.6
144
AZ761–1A–6DS
AZ761–1C–6DS
12
9.0
31.3
576
AZ761–1A–12DS
AZ761–1C–12DS
18
13.5
46.9
1,296
AZ761–1A–18DS
AZ761–1C–18DS
24
18.0
62.6
2,304
AZ761–1A–24DS
AZ761–1C–24DS
48
36.0
125.2
9,216
AZ761–1A–48DS
AZ761–1C–48DS
60
45.0
147.8
12,867
AZ761–1A–60DS
AZ761–1C–60DS
* _{“1A” or “1C” denote silver cadmium oxide contacts. Substitute “1B” in place of “1A” for 1 Form B contact.}
Add suffix “E” to “1A” or “1B” or “1C” for silver tin oxide contacts.
Add suffix “B” to “1A” or “1B” or “1C” for silver nickel contacts. (Not VDE approved!)
Add suffix “E” at the end of order number for sealed version.
Add suffix “A” at the end of order number for gold plated contacts.
Add suffix “K” at the end of order number for 5 mm pin spacing version.
Add suffix “F” at the end of order number for Class F version.
AC COIL SPECIFICATIONS - STANDARD COIL
Nominal Coil Must Operate Max. Continuous Nominal Current Coil Resistance
VAC
VAC
VAC
mA ± 10%
Ohm ± 15%
24
18.0
31.2
31.6
350
115
86.3
149.5
6.6
8,100
230
172.5
299.0
3.2
32,500
* _{“1A” or “1C” denote silver cadmium oxide contacts.}
Add suffix “E” to “1A” or “1C” for silver tin oxide contacts.
Add suffix “B” to “1A” or “1C” for silver nickel contacts.
Add suffix “E” before “F” (AC coils) at the end of order number for sealed version.
Add suffix “A” before “F” (AC coils) at the end of order number for gold plated contacts.
ORDER NUMBER*
1 Form A
AZ761–1A–24AF
AZ761–1A–115AF
AZ761–1A–230AF
1 Form C
AZ761–1C–24AF
AZ761–1C–115AF
AZ761–1C–230AF
MECHANICAL DATA
.63 Max.
[16.0]
.142
[3.6]
1.155 Max.
[29.3]
.512 Max.
[13.0]
.012
[0.3]
2 x .020
[0.5]
2 x .020
[0.5]
3 x .020
[0.5]
3 x .031
[0.8]
PC BOARD LAYOUT
3.5mm spacing Form C
5 x ø .051
[ø 1.3]
.138
[3.5]
.138
[3.5]
5.0mm spacing Form C
5 x ø .051
[ø 1.3]
.198
[5.04]
.198
[5.04]
.101
[2.56]
*
**
.299
[7.6]
.794
[20.16]
.260
[6.6]
Viewed toward terminals
*
**
.299
[7.6]
.794
.260
[20.16]
[6.6]
* Not used on 1 Form A relay
** Not used on 1 Form B relay
1 Form A
WIRING DIAGRAMS
1 Form B
1 Form C
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-01-29