AZ761_14 Datasheet, PDF (1/3 Pages) ZETTLER Electronics – 12 A SPDT MINIATURE POWER RELAY

AZ761
12 A SPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• Epoxy sealed version available
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
EN 60335-1 (VDE 0700, part 1)
• Class F insulation (155°C) available
• UL, CUR file E44211
• VDE certificate 40006031
CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A, 1 Form B)
Ratings
Resistive load:
Max. switched power: 360 W or 3324 VA
Max. switched current: 12 A
Max. switched voltage: 125 VDC* or 440 VAC
Material
Resistance
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Silver cadmium oxide [1], silver tin oxide [2],
silver nickel [3]. Gold plating available
< 50 miliohms initially
COIL
Power
At Pickup Voltage
(typical)
196 mW standard DC coil
141 mW sensitive DC coil
.422 VA AC coil
Max. Continuous
Dissipation
1.7 W at 20°C (68°F) ambient
1.7 VA at 20°C (68°F) ambient
Temperature Rise
26°C (47°F) standard coil
(at nominal coil voltage) 17°C (31°F) sensitive coil
Temperature
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 12 A 250 VAC Res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
C250
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Vibration
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F) standard
-40°C (-40°F) to 105°C (221°F) sensitive
-40°C (-40°F) to 70°C (158°F) AC coils
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
14 grams
Packing unit in pcs 50 per plastic tray / 500 per carton box
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-01-29