AZ761_14 Datasheet, PDF (2/3 Pages) ZETTLER Electronics – 12 A SPDT MINIATURE POWER RELAY

AZ761
CONTACTS
Rated Load
UL, CUR
Standard coil
12 A at 277 VAC, Resistive, 50k cycles, 85°C [1]
12 A at 277 VAC, Resistive, 100 k cycles, 85°C [2][3]
1_{/2 HP at 250 VAC, 85°C [1]}
1_{/4 HP at 125 VAC, 85°C [1]}
B300, 85°C [2]
R300, 85°C [2]
Sensitive coil
10 A at 250 VAC Resistive, 100k cycles, 85°C [1]
Rated Load
VDE
1 Form A - DC coil
12 A at 250 VAC, 50k cycles, 85°C [3]
12 A at 250 VAC, 20k cycles, 85°C [2]
12 A at 250 VAC, 30k cycles, 70°C [1]
10 A at 250 VAC, 100k cycles, 70°C [1]
1 Form A - DC coil sensitive
10 A at 250 VAC, 100k cycles, 85°C [1]
10 A at 250 VAC, 20k cycles, 85°C [2]
6 A at 400 VAC, 100k cycles, 85°C [1]
1 Form A - AC coil
12 A at 250 VAC, 50k cycles, 70°C [3][2]
1 Form C - DC coil
12 A at 250 VAC, 50k cycles, 85°C [3]
12 A at 250 VAC, 20k cycles, 85°C [2]
12 A at 250 VAC, 30k cycles, 70°C [1]
1 Form C - DC coil sensitive
10 A at 250 VAC, 70k cycles, 85°C [1]
10 A at 250 VAC, 20k cycles, 85°C [2]
6 A at 400 VAC, 70k cycles, 85°C [1]
1 Form C - AC coil
12 A at 250 VAC, 30k cycles, 70°C [3][2]
RELAY ORDERING DATA
DC COIL SPECIFICATIONS – STANDARD COIL
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
1 Form A
1 Form C
5
3.5
10.2
62
AZ761–1A–5D
AZ761–1C–5D
6
4.2
12.3
90
AZ761–1A–6D
AZ761–1C–6D
9
6.3
18.3
200
AZ761–1A–9D
AZ761–1C–9D
12
8.4
24.7
360
AZ761–1A–12D
AZ761–1C–12D
18
12.6
37.0
810
AZ761–1A–18D
AZ761–1C–18D
24
16.8
49.4
1,440
AZ761–1A–24D
AZ761–1C–24D
48
33.6
98.0
5,760
AZ761–1A–48D
AZ761–1C–48D
60
42.0
112.9
7,500
AZ761–1A–60D
AZ761–1C–60D
110
77.0
206.9
25,200
AZ761–1A–110D
AZ761–1C–110D
* _{“1A” or “1C” denote silver cadmium oxide contacts. Substitute “1B” in place of “1A” for 1 Form B contact.}
Add suffix “E” to “1A” or “1B” or “1C” for silver tin oxide contacts.
Add suffix “B” to “1A” or “1B” or “1C” for silver nickel contacts.
Add suffix “E” at the end of order number for sealed version.
Add suffix “A” at the end of order number for gold plated contacts.
Add suffix “K” at the end of order number for 5 mm pin spacing version.
Add suffix “F” at the end of order number for Class F version.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-01-29