SP5654 Datasheet, PDF (14/15 Pages) Zarlink Semiconductor Inc – 2.7GHz 3-WIRE BUS CONTROLLED SYNTHESISER

SP5654
PACKAGE DETAILS
Dimensions are shown thus: mm (in). For further package information please contact your local Customer Service Centre.
9.80/.01
(0.386/0.394)
0.18/0.25
(0.007/0.010)
16
CHAMFER
REF
PIN 1
0.35/0.49
(0.014/0.0019)
SPOT REF
0.25/0.51
3.80/4.00
(0.150/0.157)
5.80/6.20
(0.228/0.244)
(0.010/0.020)
345^O
0–8^O
0.41/1.27
(0.016/0.050)
0.69 (0.027)
MAX
16 LEADS AT
1.27 (0.050)
NOM SPACING
0.10/0.25 1.35/1.91
(0.004/0.010) (0.053/0.075)
NOTES
1. Controlling dimensions are inches.
2. This package outline diagram is for guidance
only. Please contact your GPS Customer
Service Center for further information.
MINIATURE PLASTIC DIL – MP16
HEADQUARTERS OPERATIONS
GEC PLESSEY SEMICONDUCTORS
Cheney Manor, Swindon,
Wiltshire United Kingdom SN2 2QW.
Tel: [phone]
Fax: [phone]
GEC PLESSEY SEMICONDUCTORS
P.O. Box 660017 1500 Green Hills Road,
Scotts Valley, California 95067–0017,
United States of America. Tel: [phone]
Fax: [phone]
CUSTOMER SERVICE CENTRES
F FRANCE & BENELUX Les Ulis Cedex Tel: [phone]
Fax: [phone]
F GERMANY Munich Tel: [phone] Fax: [phone]
F ITALY Milan Tel: [phone] Fax: [phone]
F JAPAN Tokyo Tel: (03) 5276–5501 Fax: (03) 5276–5510
F NORTH AMERICA Scotts Valley, USA
Tel: [phone] Fax: [phone]
F SOUTH EAST ASIA Singapore Tel: [phone] Fax: [phone]
F SWEDEN Stockholm Tel: [phone] Fax: [phone]
F TAIWAN, ROC Taipei Tel: [phone] Fax: [phone]
F UK, EIRE, DENMARK, FINLAND & NORWAY
Swindon Tel: [phone] Fax: [phone]
These are supported by Agents and Distributors in major countries world–wide.
E GEC Plessey Semiconductors 1995 Publication No. D.S. 3931 Issue No. 1.5 February 1995
TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM
This publication is issued to provide information only, which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any
order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability,
performance or suitability of any product or service. The Company reserves the right to alter without proir knowledge the specification, design, or price of any product or service.
Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of
equipment. It is the user’s responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up
to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All
products and materials are sold and services provided subject to the Company’s conditions of sale, which are available on request.
12