SP5610 Datasheet, PDF (14/15 Pages) Zarlink Semiconductor Inc – 1.3GHz BI-DIRECTIONAL I2C BUS CONTROLLED SYNTHESISER

SP5610
9.80/10.01
(0.386/0.394)
16 LEAD MINIATURE PLASTIC MP16
0.69 (0.027) NOM
AT 4 PLACES
PIN 1
PIN 1 IDENTIFICATION
0.35/0.49
(0.014/0.019)
1.27 (0.050) NOM
PIN SPACING
8°MAX
0.25/0.51
(0.010/0.020) X45°
0.19/0.25
(0.007/0.010)
0.10/0.25
(0.004/0.010)
0.41/1.27
(0.016/0.050)
5.80/6.20
(0.228/0.244)
Purchase of GEC Plessey I2C components conveys a licence under the Philips I2C Patent rights to use these components in an I2C System, provided that the system conforms to the
standard I2C Standard Specification as defined by Philips.
All brand names and product names used in this publication are trademarks,
registered trademarks or trade names of their respective owners.
HEADQUARTERS OPERATIONS
GEC PLESSEY SEMICONDUCTORS
Cheney Manor, Swindon,
Wiltshire United Kingdom SN2 2QW.
Tel: [phone]
Fax: [phone]
GEC PLESSEY SEMICONDUCTORS
P.O. Box 660017 1500 Green Hills Road,
Scotts Valley, California 95067–0017,
United States of America. Tel: [phone]
Fax: [phone]
Internet: http//www.gpsemi.com
CUSTOMER SERVICE CENTRES
F FRANCE & BENELUX Les Ulis Cedex Tel: [phone]
Fax: [phone]
F GERMANY Munich Tel: [phone] Fax: [phone]
F ITALY Milan Tel: [phone] Fax: [phone]
F JAPAN Tokyo Tel: (03) 5276–5501 Fax: (03) 5276–5510
KOREA Seoul Tel: [phone] Fax: [phone]
F NORTH AMERICA Scotts Valley, USA
Tel: [phone] Fax: [phone]
F SOUTH EAST ASIA Singapore Tel: [phone] Fax: [phone]
F SWEDEN Stockholm Tel: [phone] Fax: [phone]
F TAIWAN, ROC Taipei Tel: [phone] Fax: [phone]
F UK, EIRE, DENMARK, FINLAND & NORWAY
Swindon Tel: [phone]/518566 Fax: [phone]
These are supported by Agents and Distributors in major countries world–wide.
E GEC Plessey Semiconductors 1997 Publication No. D.S. 3920 Issue No. 3.3 February 1997
TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM
This publication is issued to provide information only, which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any
order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability,
performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design, or price of any product or service. Information
concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It
is the user’s responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and
has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and
materials are sold and services provided subject to the Company’s conditions of sale, which are available on request.
12