AC0402BRNPO5BN Datasheet, PDF (17/24 Pages) YAGEO Corporation – SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS

Product specification 17
Surface-Mount Ceramic Multilayer Capacitors ^{Automotive grade NP0/X7R 6.3 V to 630 V}
24
TEST
Temperature
Cycling
TEST METHOD
AEC-Q200 4
PROCEDURE
Preconditioning;
150 +0/–10 °C for 1 hour, then keep for
24 ± 1 hours at room temperature
1000 cycles with following detail:
30 minutes at lower category temperature
30 minutes at upper category temperature
Recovery time 24 ± 2 hours
Destructive
AEC-Q200 5
Physical Analysis
Moisture
Resistance
AEC-Q200 6
10ea X 3 lots.
Note: Only applies to SMD ceramics.
Electrical test not required.
T=24 hrs/per cycle; 10 continuous cycles unpowered.
Measurement at 24 ± 2 hours after test condition.
REQUIREMENTS
No visual damage
∆C/C
Class1:
NP0: Within ± 1% or 0.5pF,
whichever is greater.
Class2:
X7R: ±10%
D.F. meet initial specified value
IR meet initial specified value
No visual damage
∆C/C
NP0: Within ± 3% or 3 pF,
whichever is greater
X7R: ± 10%
D.F.
Within initial specified value
IR
NP0: ≥ 10,000 MΩ
X7R: Meet initial specified
value
Fig. 4 Moisture resistant
Mar. 31, 2017 V.6
www.yageo.com