CC1210KKX5R7BB226 Datasheet, PDF (16/17 Pages) YAGEO Corporation – SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS

Product specification 16
Surface-Mount Ceramic Multilayer Capacitors ^{High-Capacitance X5R/X7R 6.3 V to 25 V}
17
Table 14 Test condition, procedure and requirements (continued)
TEST
TEST METHOD
PROCEDURE
Resistance to IEC 60384-10 4.10
leaching
Solder bath temperature: 260 ±5 °C
Dipping time 30 ±0.5 seconds
REQUIREMENTS
Using visual enlargement of × 10,
dissolution of the termination
shall not exceed 10%
Damp heat,
with U_r load
4.14 Initial measurements; after 150 +0/-10 °C for 1 hour, then X5R/X7R: lΔC/Cl: ±20%
keep for 24 ±1 hours at room temperature
Y5V: lΔC/Cl: ±30%
Duration and conditions: 500 ±12 hours at 40 ±2 °C;
90 to 95% RH; U_r applied
Final measurement: perform a heat treatment at 150 +0/–
10 °C for 1 hour, final measurements shall be carried out
D.F.: 2 × initial value max.
R_ins: 500 MΩ or R_ins × C_r ≥ 25
seconds, whichever is less
24 ±1 hours after recovery at room temperature without
load.
June 1, 2006 V.11
www.yageo.com