CA0612KRX7R8BB473 Datasheet, PDF (13/17 Pages) YAGEO Corporation – SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS

Surface-Mount Ceramic Multilayer Capacitors ^4C-Array
NP0/X7R/Y5V
Product specification 13
16 V to 50 V
17
TESTS AND REQUIREMENTS
Table 7 Test procedures and requirements
TEST
TEST METHOD PROCEDURE
Mounting
IEC 60384- 4.3 The capacitors may be mounted on printed-circuit boards or
21/22
ceramic substrates
REQUIREMENTS
No visible damage
Visual
inspection
and
dimension
check
4.4 Any applicable method using × 10 magnification
In accordance with specification
Capacitance
4.5.1 Class 1:
f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 V_rms at 20 °C
f = 1 KHz for C > 1 nF, measuring at voltage 1 V_rms at 20 °C
Class 2:
f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 V_rms at 20 °C
f = 120 Hz for C >10 µF, measuring at voltage 0.5 V_rms at 20 °C
Within specified tolerance
Dissipation
factor (D.F.)
4.5.2 Class 1:
f = 1 MHz for C ≤ 1 nF , measuring at voltage 1 V_rms at 20 °C
f = 1 KHz for C > 1 nF, measuring at voltage 1 V_rms at 20 °C
Class 2:
f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 V_rms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 V_rms at 20 °C
In accordance with specification
Insulation
resistance
Temperature
coefficient
Temperature
characteristic
4.5.3 At U_r (DC) for 1 minute
4.6 Class 1:
Between minimum and maximum temperature
NP0: -55 °C to +125 °C
Normal Temperature: 20 °C
Class 2:
Between minimum and maximum temperature
X5R: -55 °C to +85 °C
X7R: -55 °C to +125 °C
Y5V: -30 °C to +85 °C
Normal Temperature: 20 °C
In accordance with specification
<General purpose series>
ΔC/C:
Class 1: NP0: ±30 ppm/°C
<General purpose series>
Class 2: X5R/X7R: ±15%
Y5V: 22% to -82%
<High Capacitance series>
Class 2: X5R/X7R: ±15%
Y5V: 22% to - 82%
Adhesion
4.7 A force applied for 10 seconds to the line joining the terminations Force
and in a plane parallel to the substrate
size ≥ 0603: 5N
size = 0402: 2.5N
size = 0201: 1N
Feb 05, 2010 V.1
www.yageo.com