XA2S200E-6FT256Q Datasheet, PDF (3/6 Pages) Xilinx, Inc – Automotive XA Product Family

R _{Spartan-IIE 1.8V FPGA Automotive XA Product Family: Introduction and Ordering Infor9/20/2003ation}
DLL
DLL
DLL
DLL
I/O LOGIC
DS077_01_052102
Figure 1: Basic Spartan-IIE Family FPGA Block Diagram
DC Specifications
Absolute Maximum Ratings⁽¹⁾
Symbol
Description
Min
Max
Units
V_CCINT
Supply voltage relative to GND
–0.5
2.0
V
V_CCO
Supply voltage relative to GND
–0.5
4.0
V
V_REF
V_IN
V_TS
Input reference voltage
Input voltage relative to GND^(2,3)
Voltage applied to 3-state output ⁽³⁾
–0.5
4.0
V
–0.5
4.05
V
–0.5
4.0
V
T_STG
Storage temperature (ambient)
–65
+150
°C
T_J
Junction temperature
-
+135
°C
Notes:
1. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions
is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time may affect device reliability.
2. V_IN should not exceed V_CCO by more than 3.6V over extended periods of time (e.g., longer than a day).
3. Maximum DC overshoot must be limited to either V_CCO + 0.5V or 10 mA, and undershoot must be limited to –0.5V or 10 mA,
whichever is easier to achieve. The Maximum AC conditions are as follows: The device pins may undershoot to –2.0V or overshoot
to V_CCO + 2.0V, provided this over/undershoot lasts no more than 11 ns with a forcing current no greater than 100 mA.
4. For soldering guidelines, see the Packaging Information on the Xilinx Web site.
DS106-1 (v1.7) October 18, 2004
www.xilinx.com
3
Preliminary Product Specification
1-800-255-7778