X86C64 Datasheet, PDF (7/12 Pages) Xicor Inc. – E2 Micro-Peripheral

X86C64
ABSOLUTE MAXIMUM RATINGS*
Temperature Under Bias
X86C64 ........................................ –10°C to +85°C
X86C64I ..................................... –65°C to +135°C
Storage Temperature ....................... –65°C to +150°C
Voltage on any Pin with
Respect to V_SS ............................... –1.0V to +7V
D.C. Output Current ............................................ 5 mA
Lead Temperature
(Soldering, 10 Seconds) ............................. 300°C
*COMMENT
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and the functional operation of
the device at these or any other conditions above those
indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reli-
ability.
RECOMMENDED OPERATING CONDITIONS
Temperature
Min.
Max.
Supply Voltage
Limits
Commercial
0°C
70°C
X86C64
5V ± 10%
Industrial
–40°C
+85°C
3819 PGM T03
Military
–55°C
+125°C
3819 PGM T02
D.C. OPERATING CHARACTERISTICS (Over recommended operating conditions unless otherwise specified.)
Symbol
Parameter
Limits
Min.
Max.
Units
Test Conditions
I_CC
V_CC Current (Active)
60
mA
ISB1(CMOS) VCC Current (Standby)
500
µA
ISB2(TTL) VCC Current (Standby)
6
mA
I_LI
ILO
VlL(1)
V_IH(1)
VOL
VOH
Input Leakage Current
Output Leakage Current
Input Low Voltage
Input High Voltage
Output Low Voltage
Output High Voltage
10
µA
10
µA
–1.0
0.8
V
2.0 V_CC + 0.5 V
0.4
V
2.4
V
CAPACITANCE T_A = 25°C, F = 1.0MHZ, V_CC = 5V
Symbol
Test
CI/O(2)
CIN(2)
Input/Output Capacitance
Input Capacitance
Max.
10
6
POWER-UP TIMING
CE = V_IL, All I/O’s = Open,
Other Inputs = V_CC, AS = V_IL
CE = VSS, All I/O’s = Open,Other
Inputs = VCC – 0.3V
CE = VIH, All I/O’s = Open, Other
Inputs = VIH
V_IN = GND to V_CC
VOUT = GND to VCC, DS = VIH
IOL = 2.1 mA
IOH = –400 µA
3819 PGM T04
Units
pF
pF
Conditions
VI/O = 0V
VIN = 0V
3819 PGM T05
Symbol
tPUR(2)
tPUW(2)
Parameter
Power-Up to Read
Power-Up to Write
Notes: (1) V_IL MIN and V_IH MAX are for reference only and are not tested.
(2) This parameter is periodically sampled and not 100% tested.
Max.
1
5
Units
ms
ms
3819 PGM T06
7