English
Language : 

WM8983_06 Datasheet, PDF (108/123 Pages) Wolfson Microelectronics plc – Mobile Multimedia CODEC with 1W Speaker Driver
WM8983
REGISTER BIT
ADDRESS
LABEL
5
MUTERPGA2INV
4
INVROUT2
3:1 BEEPVOL
44 (2Ch)
0
BEEPEN
8
MBVSEL
7
6
R2_2INPPGA
5
RIN2INPPGA
4
RIP2INPPGA
3
2
L2_2INPPGA
1
LIN2INPPGA
0
LIP2INPPGA
45 (2Dh)
8
INPPGAU
7
INPPGAZCL
6
INPPGAMUTEL
DEFAULT
0
0
000
0
0
0
0
1
1
0
0
1
1
N/A
0
0
DESCRIPTION
Production Data
REFER TO
Mute input to INVROUT2 mixer
Mute input to INVROUT2 mixer
AUXR input to ROUT2 inverter gain
000 = -15dB
...
111 = +6dB
0 = mute AUXR beep input
1 = enable AUXR beep input
Microphone Bias Voltage Control
0 = 0.9 * AVDD
1 = 0.65 * AVDD
Reserved
Connect R2 pin to right channel input PGA
positive terminal.
0=R2 not connected to input PGA
1=R2 connected to input PGA amplifier positive
terminal (constant input impedance).
Connect RIN pin to right channel input PGA
negative terminal.
0=RIN not connected to input PGA
1=RIN connected to right channel input PGA
amplifier negative terminal.
Connect RIP pin to right channel input PGA
amplifier positive terminal.
0 = RIP not connected to input PGA
1 = right channel input PGA amplifier positive
terminal connected to RIP (constant input
impedance)
Reserved
Connect L2 pin to left channel input PGA
positive terminal.
0=L2 not connected to input PGA
1=L2 connected to input PGA amplifier positive
terminal (constant input impedance).
Connect LIN pin to left channel input PGA
negative terminal.
0=LIN not connected to input PGA
1=LIN connected to input PGA amplifier
negative terminal.
Connect LIP pin to left channel input PGA
amplifier positive terminal.
0 = LIP not connected to input PGA
1 = input PGA amplifier positive terminal
connected to LIP (constant input impedance)
INPPGAVOLL and INPPGAVOLR volume do
not update until a 1 is written to
INPPGAUPDATE (in reg 45 or 46)
Left channel input PGA zero cross enable:
0=Update gain when gain register changes
1=Update gain on 1st zero cross after gain
register write.
Mute control for left channel input PGA:
0=Input PGA not muted, normal operation
1=Input PGA muted (and disconnected from the
following input BOOST stage).
Analogue
Outputs
Analogue
Outputs
Analogue
Outputs
Analogue
Outputs
Input Signal
Path
Input Signal
Path
Input Signal
Path
Input Signal
Path
Input Signal
Path
Input Signal
Path
Input Signal
Path
Input Signal
Path
Input Signal
Path
Input Signal
Path
w
PD Rev 4.0 November 2006
108