W25X16 Datasheet, PDF (46/47 Pages) Winbond – 16M-BIT, 32M-BIT, AND 64M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI

W25X16, W25X32, W25X64
15. REVISION HISTORY
VERSION
A
DATE
02/13/06
B
06/28/06
C
10/19/06
PAGE
DESCRIPTION
New Create
1-4, 6, 32-36,
41, 42
Added W25X64 in the product family of
W25X16/32/64. Added 300mil PDIP package.
Added 6x5 mm WSON package. Updated
Endurance and Data Retention table (11.3),
ICC’s in DC Parameter table (11.5 & 11.6).
Reduced tPP (max) from 5mS to 3mS.
Changed tSHCH from 5nS to 0nS. Added
byte programming parameters (tBP1 & tBPn.
Added additional byte programming
parameter, tBP2 and moved multiple byte
programming tBPn with formula to foot note.
18, 35, 37 & 45
Changed tCHSH and tSHCH respectively
from 10nS and 0nS to 5nS to 5nS. Modified
to the ordering information table to eliminate
the hyphen in the part number. Corrected
Write Enable/Disable text. Change ICC2
from 5uA to 10uA.. Added footnotes in the
ordering information table.
Changed ICC3 specs:
33Mhz (typ): from 10/10mA to 10/13mA
50Mhz (typ): from 10/15mA to 12/15mA
50Mhz (max): from 15/20mA to 17/22mA
D
2/1/07
4 - 8 & 45
Updated package and ordering information.
Updated Figure 2.
Updated ICC3 specs:
1MHz (typ): from 5/8mA to 4/5mA
1MHz (max): from 10/12mA to 6/7.5mA
33MHz (typ): from 10/13mA to 6/7mA
33MHz (max): from 15/20mA to 9/10mA
E
2/26/07
6-9, 29, 33, 35, 50MHz (typ): from 12/15mA to 7/8mA
38 & 45
50MHz (max): from 17/22mA to 10/12mA
75MHz (typ): from 15/20mA to 10/11mA
75MHz (max): from 20/25mA to 15/16.5mA
Added Valid Combinations for ordering info.
Added transient voltage specification.
Removed preliminary designation for 25X16.
Updated typical ratings on erase operations.
- 46 -