W25X16 Datasheet, PDF (33/47 Pages) Winbond – 16M-BIT, 32M-BIT, AND 64M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI

W25X16, W25X32, W25X64
12. ELECTRICAL CHARACTERISTICS ⁽¹⁾
12.1 Absolute Maximum Ratings ⁽²⁾
PARAMETERS
Supply Voltage
Voltage applied to any Pin
Transient Voltage on any Pin
Storage Temperature
Lead Temperature
Electrostatic Discharge Voltage
SYMBOL CONDITIONS
VCC
VIO
Relative to Ground
VIOT
<20nS Transient
Relative to Ground
TSTG
TLEAD
VESD
Human Body Model⁽⁴⁾
RANGE
–0.6 to +4.0
–0.6 to VCC +0.4
UNIT
V
V
–2.0V to VCC+2.0V V
–65 to +150
°C
See Note ⁽³⁾
°C
–2000 to +2000
V
Notes:
1. Specifications for W25X32 and W25X64 are preliminary. See preliminary designation at the end of
this datasheet.
2. This device has been designed and tested for the specified operation ranges. Proper operation
outside of these levels is not guaranteed. Exposure to absolute maximum ratings may affect device
reliability. Exposure beyond absolute maximum ratings may cause permanent damage.
3. Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly
and the European directive on restrictions on hazardous substances (RoHS) 2002/95/EU.
4. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500 ohms, R2=500 ohms).
12.2 Operating Ranges
PARAMETER
SYMBOL CONDITIONS
Supply Voltage⁽¹⁾
Ambient Temperature,
Operating
VCC
TA
F_R = 50MHz, fR = 33MHz
F_R0 = 70MHz, fR = 33MHz
F_R1 = 75MHz, fR = 33MHz
Commercial ⁽²⁾
Industrial
SPEC
MIN
MAX
2.7
3.6
3.0
3.6
3.0
3.6
0
+70
–40
+85
UNIT
V
°C
Note:
1.
2.
VCC voltage during Read can operate across the min and max range but should not exceed ±10% of the
programming (erase/write) voltage.
Commercial temperature only applies to Fast Read (F_R0 & F_R1) and 100K cycles endurance for 4K byte sectors .
Industrial temperature applies to all other parameters.
- 33 -
Publication Release Date:
February 26, 2007, Revision E