W83301R Datasheet, PDF (12/16 Pages) Winbond – ACPI-STR Controller

W83301R
Preliminary
8.Electrical Characteristics
8.1 ABSOLUTE MAXIMUM RATINGS
Stresses greater than those listed in this table may cause permanent damage to the
device. Precautions should be taken to avoid application of any voltage higher than the
maximum rated voltages to this circuit. Subjection to maximum conditions for extended
periods may affect reliability. Unused inputs must always be tied to an appropriate logic
voltage level (Ground or Vdd).
Symbol
Vss, V_cc
ChrPmp
Hi-V Pins
Lo-V Pins
T_STG
T_B
T_A
Parameter
Voltage on any pin with respect to GND
Pin# 1,2,3,4,8,15,16,18,19,20
Pin# 7,10,11,12,13,14,17
Storage Temperature
Ambient Temperature
Operating Temperature
Rating
- 0.5 V to + 7.0 V
- 0.5 V to + 12.0 V
GND-0.3 V to V_Chr-Pmp + 0.3V
GND-0.3 V to Vcc + 0.3V
- 65°C to + 150°C
- 55°C to + 125°C
0°C to + 70°C
8.2 AC CHARACTERISTICS
Vcc=5V ± 5 %, T_A = 0°C to +70°C
Parameter
Symbol Min Typ Max Units
Test Conditions
Vcc SUPPLY CURRENT
Norminal Supply Current
POWER-ON RESET
I_5VSB
6
mA
Rising V_5VSB Threshold
5VSB Hysteresis
4.3
V
V_{Chr_Pmp} > 8.5V
1
V
Rising V_{Chr_Pmp} Threshold
V_{Chr_Pmp} Hysteresis
SOFT-START
8.5
V
V_5VSB > 4.3V
1
V
Soft-Start Current
Iss
18
uA
V_SS upper limit
9
V
Confidential
10
Revision 0.6