W3EG72129S-JD3 Datasheet, PDF (7/12 Pages) White Electronic Designs Corporation – 1GB - 2x64Mx72 DDR SDRAM REGISTERED w/PLL

White Electronic Designs
W3EG72129S-JD3
PRELIMINARY
DDR SDRAM COMPONENT ELECTRICAL CHARACTERISTICS AND
RECOMMENDED AC OPERATING CONDITIONS
Notes 1-5, 7; notes appear following parameter tables; 0°C ≤ TA ≤ +70°C; VCC = +2.5V ±0.2V, VCCQ = +2.5V ±0.2V
AC Characteristics
403
335
262
263/265
202
Parameter
Symbol Min Max Min Max Min Max Min Max Min Max Units Notes
Access window of DQs from CK, CK#
tAC -0.7 +0.7 -0.7 +0.7 -0.75 +0.75 -0.75 +0.75 -0.75 +0.75 ns
CK high-level width
tCH 0.45 0.55 0.45 0.55 0.45 0.55 0.45 0.55 0.45 0.55 tCK
CK low-level width
tCL 0.45 0.55 0.45 0.55 0.45 0.55 0.45 0.55 0.45 0.55 tCK
Clock cycle time
CL=3 tCK (3) 5 7.5 6 13 7.5 13 7.5 13 7.5 13 ns
CL=2.5 tCK (2.5) 5 7.5 6 13 7.5 13 7.5 13 7.5 13 ns
CL=2 tCK (2)
7.5 13 7.5 13 7.5 13 10 13 ns
DQ and DM input hold time relative to DQS
tDH 0.4
0.45
0.5
0.5
0.5
ns
DQ and DM input setup time relative to DQS
tDS 0.4
0.45
0.5
0.5
0.5
ns
DQ and DM input pulse width (for each input)
tDIPW 1.75
1.75
1.75
1.75
1.75
ns
Access window of DQS from CK, CK#
tDQSCK -0.6 +0.6 -0.6 +0.6 -0.75 +0.75 -0.75 +0.75 -0.75 +0.75 ns
DQS input high pulse width
tDQSH 0.35
0.35
0.35
0.35
0.35
tCK
DQS input low pulse width
tDQSL 0.35
0.35
0.35
0.35
0.35
tCK
DQS-DQ skew, DQS to last DQ valid, per group,
tDQSQ
0.4
0.45
0.5
0.5
0.5 ns
per access
Write command to first DQS latching transition
tDQSS 0.75
0.75 1.25 0.75 1.25 0.75 1.25 0.75 1.25 tCK
DQS falling edge to CK rising - setup time
tDSS 0.2
0.2
0.2
0.2
0.2
tCK
DQS falling edge from CK rising - hold time
tDSH 0.2
0.2
0.2
0.2
0.2
tCK
Half clock period
tHP tCH, tCL
tCH, tCL
tCH, tCL
tCH, tCL
tCH, tCL
ns
Data-out high-impedance window from CK, CK#
tHZ
+0.7
+0.7
+0.75
+0.75
+0.75 ns
Data-out low-impedance window from CK, CK#
tLZ -0.7
-0.7
-0.75
-0.75
-0.75
ns
Address and control input hold time (fast slew rate) tIHf 0.6
0.75
0.90
0.90
0.90
ns
Address and control input set-up time (fast slew rate) tISf 0.6
0.75
0.90
0.90
0.90
ns
Address and control input hold time (slow slew rate) tIHs 0.6
0.8
1
1
1
ns
Address and control input setup time (slow slew rate) tISs 0.6
0.8
1
1
1
ns
Address and control input pulse width (for each
tIPW 2.2
2.2
2.2
2.2
2.2
ns
input)
LOAD MODE REGISTER command cycle time
tMRD 10
12
15
15
15
ns
DQ-DQS hold, DQS to first DQ to go non-valid, per tQH tHP-
tHP-
tHP-tQHS
tHP-tQHS
tHP-
ns
access
tQHS
tQHS
tQHS
Data hold skew factor
tQHS
0.5
0.55
0.75
0.75
0.75 ns
ACTIVE to PRECHARGE command
tRAS 40 70,000 42 70,000 40 120,000 45 120,000 45 120,000 ns
ACTIVE to READ with Auto precharge command
tRAP 15
18
15
20
20
ns
ACTIVE to ACTIVE/AUTO REFRESH command
tRC 55
60
60
65
65
ns
period
16
16
22
22
22
14,17
14,17
17
13,14
18
8,19
8,20
6
6
6
6
13,14
15
AUTO REFRESH command period
tRFC 70
72
75
75
75
ns 21
October 2005
Rev. 3
7
White Electronic Designs Corporation • [phone] • www.wedc.com