PSPRL1103M Datasheet, PDF (6/7 Pages) Wall Industries,Inc. – Medical AC/DC Switching Power Supplies

Rev. A
PSPRL1103M Series
150~300 Watts
PFC, Single Outputs
Medical AC/DC Switching Power Supplies
MECHANICAL DRAWING
Enclosed with Top-Side Built-in Fan Models (Type “F”): 5(L) x 3.2(W) x 2(H) inches; Weight: 1.43 lbs
Unit mm [inches]
*FOR PSPRL0801F & PSPRL1103F SERIES
COVER WITH BUILT-IN DC FAN
127.00 [5.00]
50.80 [2.00]
81.28 [3.20]
FAN
U-CHASSIS
63.50 [2.50]
114.30 [4.50]
I/O CONNECTOR PIN ASSIGNMENTS:
Input Connector (CN1):
PSPRL1103M U & F (U-Chassis & Enclosed with Top-Side Built-in Fan Types): Mating Molex Part No. 035977-0590 or equivalent (5pin, 3 used) or
Terminal Block: Howder M3 screws 3 pin 6.35mm center Part No. HD-601-3P; PCB Labeling: L=Line, N=Neutral, G=Chassis Ground
PSPRL1103ME (Enclosed with Rear-Side Built-in Fan Type): IEC320 snap-in mounting type or Terminal Block: Howder HD-602-3P.
Output Connector (CN2):
Mating Molex Part No. 035977-0690; Terminal B-Dinkle P830N, M5 screws
Mounting Inserts:
6 places M3. Maximum penetration 0.15” (3.8mm). See drawing for location.
OUTPUT PIN ASSIGNMENT
Dinkle
Molex
VO+ Pin 2
Pins 4~6
VO-
Pin 1
Pins 1~3
Logic Signal Connectors (CN3):
Mating JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04); Mating Pins: JST SXH-002T-P0.6 for AWG 30 to 26
Fan Driver Connector (FAN1):
Mating Connector is JST P/N XHP-3 (3 pins 0.98 pitch) or equivalent (CHYAO SHIUNN JS-2001-03).
06/22/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Page 6 of 7