PSPRL1103M Datasheet, PDF (5/7 Pages) Wall Industries,Inc. – Medical AC/DC Switching Power Supplies

Rev. A
PSPRL1103M Series
150~300 Watts
PFC, Single Outputs
Medical AC/DC Switching Power Supplies
MECHANICAL DRAWING
Enclosed with Rear-Side Built-in Fan Models (Type “E”): 6.5(L) x 3.2(W) x 1.6(H) inches; Weight: 1.32 lbs
Unit: mm [inches]
114.30 [4.50]
6.35 [0.25]
19.05 [0.75]
40.64 [1.60]
68.58 [2.70]
44.52 [1.75]
81.28 [3.20]
64.77 [2.55]
8.26 [0.32]
165.10 [6.50]
I/O CONNECTOR PIN ASSIGNMENTS:
Input Connector (CN1):
PSPRL1103M U & F (U-Chassis & Enclosed with Top-Side Built-in Fan Types): Mating Molex Part No. 035977-0590 or equivalent (5pin, 3 used) or Terminal Block: Howder M3 screws 3 pin 6.35mm center
Part No. HD-601-3P; PCB Labeling: L=Line, N=Neutral, G=Chassis Ground
PSPRL1103ME (Enclosed with Rear-Side Built-in Fan Type): IEC320 snap-in mounting type or Terminal Block: Howder HD-602-3P.
Output Connector (CN2):
Mating Molex Part No. 035977-0690; Terminal B-Dinkle P830N, M5 screws
Mounting Inserts:
6 places M3. Maximum penetration 0.15” (3.8mm). See drawing for location.
Logic Signal Connectors (CN3):
Mating JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04); Mating Pins: JST SXH-002T-P0.6 for AWG 30 to 26
OUTPUT PIN ASSIGNMENT
Dinkle
Molex
VO+ Pin 2
Pins 4~6
VO- Pin 1
Pins 1~3
Fan Driver Connector (FAN1):
Mating Connector is JST P/N XHP-3 (3 pins 0.98 pitch) or equivalent (CHYAO SHIUNN JS-2001-03).
06/22/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Page 5 of 7