PSPRL0801D Datasheet, PDF (5/6 Pages) Wall Industries,Inc. – AC/DC Switching Power Supply

Rev. A
PSPRL0801D Series
Up to 240 Watts
Dual Output, Active PFC
AC/DC Switching Power Supply
Type “F” Models (Enclosed with Top Built-in Fan): 5(L) x 3.2(W) x 2(H) Inches; Weight: 21.16oz
Unit: mm [inches]
63.50 [2.50]
114.30 [4.50]
50.80 [2.00]
OUTPUT PIN ASSIGNMENT
Howder
Molex
V1:Pin 3
V1:Pins 6 ~ 8
RTN: Pin 2
RTN: Pins 2 ~ 5
V2: Pin 1
V2: Pin 1
I/O CONNECTOR PIN ASSIGNMENT
Input Connector (CN1):
Molex Part No. 09-91-0050 or equivalent (5pin, 3used), PCB is Labeled: L=Line; N=Neutral;
G=Chassis Ground Mating Pins; Moles Engineering Series 2478, 2578, 8818.
Terminal block - Howder M3 Part No. HD-601-3P
Output Connector (CN2):
Molex Part No. 09-91-0800
Terminal block - Howder M3 Part No. HD-816-3P
Output Pin Assignment:
DUAL OUTPUT
Howder
V1:Pin 3
Molex
V1:Pins 6 ~ 8
RTN: Pin 2
RTN: Pins 2 ~ 5
V2: Pin 1
V2: Pin 1
Mounting Inserts:
6 Paces M3x0.7. Maximum Penetration 4mm see outline drawing for location.
Logic Signal Connector (CN3):
Mating JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04);
Mating Pins: JST SXH-002T-P0.6 FOR AWG 30 to 26.
Fan driver connector (FAN2):
Mating connector is JST P/N XHP-3 (3 pins 0.98 pitch) or equivalent (CHYAO SHIUNN JS-2001-03).
10/01/2010
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax [phone]
Page 5 of 6