English
Language : 

PSPRL0801D Datasheet, PDF (3/6 Pages) Wall Industries,Inc. – AC/DC Switching Power Supply
Rev. A
PSPRL0801D Series
Up to 240 Watts
Dual Output, Active PFC
AC/DC Switching Power Supply
Model (1)
V1
PSPRL0801Dx-0512
V2
V1
PSPRL0801Dx-0524
V2
V1
PSPRL0801Dx-0548
V2
V1
PSPRL0801Dx-1224
V2
Input Voltage
Range
90 ~ 264VAC
90 ~ 264VAC
90 ~ 264VAC
90 ~ 264VAC
MODEL SELECTION TABLE
Output Voltage
+5VDC
Maximum Output Current
Type U
(Convection)
Types E, F, C, & U
(forced air)
12A
24A
+12VDC
6.67A
13.33A
+5VDC
12A
24A
+24VDC
3.33A
6.67A
+5VDC
12A
24A
+48VDC
1.67A
3.33A
+12VDC
6.67A
13.33A
+24VDC
3.33A
6.67A
Maximum Output Power (2)
Type U
(Convection)
Types E, F, C, & U
(forced air)
120W
240W
120W
240W
120W
240W
120W
240W
NOTES
1. Mechanical Options: The “x” in the model number can be U for U-chassis type, C for U-chassis with top cover, E for enclosed type with rear side
built-in fan, or F for enclosed type with top side built-in fan.
2. U Type Models: U-Chassis @ 240W max. with 25CFM max. forced airflow or 120W convection cooled output.
C Type Models: U-Chassis with top cover @ 240W max. with 25CFM max. forced airflow or 120W convection cooled output.
E Type Models: Enclosed with rear side built-in fan @ 240W max.
F Type Models: Enclosed with top built-in fan @ 240W max.
3. Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output with 0.1μF ceramic and 22μF electrolytic capacitors in parallel.
4. Provides peak power to 600W within 500µs for all models; for longer duty duration must contact manufacturer.
5. 10% minimum load is required to maintain the ripple and regulation specifications.
6. Output is fully isolated.
MECHANICAL DRAWINGS
Unit: mm [inches]
Type “U” Models (U-Chassis): 5(L) x 3.2(W) x 1.5(H) Inches; Weight: 17.64oz
10/01/2010
5.00 [0.20]
4.50 [0.18]]
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
OUTPUT PIN ASSIGNMENT
Howder
Molex
V1:Pin 3
V1:Pins 6 ~ 8
RTN: Pin 2
RTN: Pins 2 ~ 5
V2: Pin 1
V2: Pin 1
Page 3 of 6