PSMAD100 Datasheet, PDF (5/8 Pages) Wall Industries,Inc. – AC/DC Power Supplies

Wall Industries, Inc.
Rev C
PSMAD100 SERIES
100 Watt, Medical AC/DC Power Supplies
MECHANICAL DRAWING
U-CHASSIS MODELS (SUFFIX “-U”)
1
3
4
1
3.00 (76.2)
3.324 (84.44)
3.60 (91.4)
TOP VIEW
Voltage Adj.
4-M3x0.5 Note 5
Hole for Setup
FRONT VIEW
SIDE VIEW
3.031 (76.99)
2.748 (69.8)
0.43 (10.8)
0.28 (7.2)
CON 1 - Input Connector
Pin 1
Line
Pin 3
Neutral
Mates with JST housing VHR-3N
and JST Series SVH-21T-P1.1
crimp terminals
CON 2 - Output Connector
Pins 1, 2
-Vout
Pins 3, 4
+Vout
Mates with JST housing VHR-4N
and JST Series SVH-21T-P1.1
crimp terminals
Mounting holes marked with must be connected to safety earth
4 - M3x0.5 Note 5
Screw for Setup
4 - M3x0.5 Note 5
Screw for Setup
BOTTOM VIEW
NOTES
1. Unit: inches (mm)
2. Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
3. Pin Pitch Tolerance: ±0.01 (±0.25)
4. Pin Dimension Tolerance: ±0.004 (±0.1)
5. M3x0.5 screw locked torque MAX 5Kgf.cm/0.49N.m
6. CON1 and CON2 screw locked torque MAX 2Kgf.cm/0.2N.m
7. CON1 and CON2 wire dimensions range 26~16AWG
8. All dimensions are for reference only
05/22/2013
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: [phone] • Toll Free: 888-597-9255 • Fax [phone]
website: www.wallindustries.com • e-mail: [e-mail]
Page 5 of 8