IL410_12 Datasheet, PDF (7/9 Pages) Vishay Siliconix – Optocoupler, Phototriac Output, Zero Crossing

IL410, IL4108
Optocoupler, Phototriac Output, Zero Crossing, _{Vishay Semiconductors}
High dV/dt, Low Input Current
APPLICATIONS
Direct switching operation:
The IL410, IL4108 isolated switch is mainly suited to control
synchronous motors, valves, relays and solenoids. Fig. 15
shows a basic driving circuit. For resistive load the snubber
circuit R_S C_S can be omitted due to the high static dV/dt
characteristic.
1
Control
2
3
21608
IL410
6
5
ZC
4
U1
Hot
R_S
220/240
C_S
VAC
Inductive load
Nutral
Fig. 15 - Basic Direct Load Driving Circuit
Indirect switching operation:
The IL410, IL4108 switch acts here as an isolated driver and
thus enables the driving of power thyristors and power triacs
by microprocessors. Fig. 16 shows a basic driving circuit of
inductive load. The resister R1 limits the driving current
pulse which should not exceed the maximum permissible
surge current of the IL410, IL4108. The resister R_G is needed
only for very sensitive thyristors or triacs from being
triggered by noise or the inhibit current.
Control
21609
IL410
R1
360
1
6
Hot
2
ZC
3
U1
5
4
R_G
330
220/240
R_S
VAC
C_S
Inductive load
Nutral
Fig. 16 - Basic Power Triac Driver Circuit
PACKAGE DIMENSIONS in millimeters
Pin one ID
3
2
1
6.30
6.50
4
5
6
8.50
8.70
ISO method A
1 min.
1.22
1.32
7.62 typ.
4° typ.
i178014
0.46
0.51
3.30
3.81
0.84 typ.
0.84 typ.
2.54 typ.
3° to 9°
18°
3.30
3.81
0.20
0.30
7.62 to 8.81
Document Number: 83627
Rev. 2.0, 29-Mar-11
For technical questions, contact: [e-mail]
www.vishay.com
7
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000