IL410_12 Datasheet, PDF (2/9 Pages) Vishay Siliconix – Optocoupler, Phototriac Output, Zero Crossing

IL410, IL4108
Vishay Semiconductors ^{Optocoupler, Phototriac Output, Zero Crossing,}
High dV/dt, Low Input Current
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
Forward current
Surge current
Power dissipation
Derate from 25 °C
V_R
I_F
I_FSM
P_diss
6
V
60
mA
2.5
A
100
mW
1.33
mW/°C
OUTPUT
Peak off-state voltage
RMS on-state current
Single cycle surge current
IL410
V_DRM
600
V
IL4108
V_DRM
800
V
I_TM
300
mA
3
A
Total power dissipation
Derate from 25 °C
P_diss
500
mW
6.6
mW/°C
COUPLER
Isolation test voltage
between emitter and detector
t=1s
V_ISO
5300
V_RMS
Pollution degree (DIN VDE 0109)
2
Creepage distance
7
mm
Clearance distance
7
mm
Comparative tracking index per
DIN IEC112/VDE 0303 part 1, group IIIa
per DIN VDE 6110
CTI
 175
Isolation resistance
Storage temperature range
Ambient temperature
Soldering temperature ⁽¹⁾
V_IO = 500 V, T_amb = 25 °C
V_IO = 500 V, T_amb = 100 °C
max. 10 s dip soldering
 0.5 mm from case bottom
R_IO
 10¹²

R_IO
 10¹¹

T_stg
- 55 to + 150
°C
T_amb
- 55 to + 100
°C
T_sld
260
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) _{Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through}
hole devices (DIP).
www.vishay.com
2
For technical questions, contact: [e-mail]
Document Number: 83627
Rev. 2.0, 29-Mar-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000