VS-ST330CL Datasheet, PDF (5/8 Pages) Vishay Siliconix – Metal case with ceramic insulator

www.vishay.com
VS-ST330CL Series
Vishay Semiconductors
8000
7500
7000
6500
At Any Rated Load Condition And With
Rated V_RRM Applied Following Surge.
Initial T_J = 125°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
6000
5500
5000
4500
4000 ST330C..L Series
3500
1
10
100
Numb er Of Eq ual Amplitude Half Cycle Current Pulses (N)
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
10000
9000
Maximum Non Repetitive Surge Current
8500
Versus Pulse Train Duration. Control
8000 ^{Of Conduction May Not Be Maintained.}
Initial T_J= 125°C
7500
No Voltage Reapplied
7000
Rated V_RRMReapplied
6500
6000
5500
5000
4500
4000 ST330C..L Series
3500
0.01
0.1
1
Pulse Train Duration (s)
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Tj = 125 °C
1000
Tj = 25 °C
ST330C..L Series
100
01234567
Instantaneous On-state Voltage (V)
Fig. 9 - On-State Voltage Drop Characteristics
1
Steady State Value
R_thJ-hs = 0.11 K/ W
(Single Side Cooled)
0.1 ^RthJ-hs ^{= 0.05 K/ W}
(Double Side Cooled)
(DC Operation)
0.01
ST330C..L Series
0.001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 10 - Thermal Impedance Z_thJ-hs Characteristics
Revision: 04-Aug-14
5
Document Number: 94408
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000