MMU0102 Datasheet, PDF (4/13 Pages) Vishay Siliconix – Professional MELF Resistors

MMU 0102, MMA 0204, MMB 0207 - Professional
Professional MELF Resistors
Vishay Beyschlag
DIMENSIONS
L
Color code marking¹⁾
D
D1
K
L1
DIMENSIONS - MELF resistor types, mass and relevant physical dimensions
TYPE
L
(mm)
D
(mm)
L_{1 min}
(mm)
D₁
(mm)
K
(mm)
MASS
(mg)
MMU 0102
2.2 + 0/- 0.1
1.1 + 0/- 0.1
1.2
D + 0/- 0.1
0.4 ± 0.05
7
MMA 0204
3.6 + 0/- 0.2
1.4 + 0/- 0.1
1.8
D + 0/- 0.15
0.8 ± 0.1
19
MMB 0207
5.8 + 0/- 0.2
2.2 + 0/- 0.2
2.8
D + 0/- 0.2
1.25 ± 0.15
79
1) _{Color code marking is applied according to IEC 60062* in four bands (E24 series) or five bands (E96 or E192 series). Each colour band appears}
as a single solid line, voids are permissible if at least 2/3 of the band is visible from each radial angle of view. The last colour band for tolerance
is approximately 50 % wider than the other bands. An interrupted yellow band between the 4th and 5th full band indicates the temperature
coefficient of 25 ppm/K.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION
RESISTANCE VALUE¹⁾
TCR
TOLERANCE
MMU 0102
MMA 0204
MMB 0207
± 100 ppm/K
± 50 ppm/K
± 25 ppm/K
Jumper
±5%
±5%
±2%
±1%
± 0.5 %
±1%
± 0.5 %
-
0.22 Ω to 0.91 Ω
1 Ω to 9.1 Ω
10 Ω to 2.21 MΩ
10 Ω to 221 kΩ
10 Ω to 221 kΩ
10 Ω to 221 kΩ
≤ 10 mΩ; I_max = 2 A
-
0.22 Ω to 0.91 Ω
-
1 Ω to 10 MΩ
10 Ω to 2.21 MΩ
10 Ω to 511 kΩ
10 Ω to 511 kΩ
≤ 10 mΩ, I_max = 3 A
0.1 Ω to 0.2 Ω
0.22 Ω to 0.91 Ω
0.2 Ω to 0.91 Ω
1 Ω to 15 MΩ
-
-
10 Ω to 1 MΩ
≤ 10 mΩ; I_max = 5 A
Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.
1) _{Resistance values to be selected for ± 5 % and ± 2 % tolerance from E24, for ± 1 % tolerance from E24 and E96 and for ± 0.5 % tolerance}
from E24 and E192.
Document Number: 28713
Revision: 18-Jul-06
For technical questions contact: [e-mail]
www.vishay.com
15