WBP Datasheet, PDF (3/6 Pages) Vishay Siliconix – High voltage, current, and temperature range

www.vishay.com
WBP
Vishay Dale
SPECIFICATIONS
PARAMETER
UNIT
MIN.
TYP.
MAX.
POWER REQUIREMENTS
Supply voltage (V_sup)
Supply current ⁽¹⁾
V
4
12
18
mA
10
15
20
CURRENT MEASUREMENT
Resistance
μ
95
100
105
Current measurement range (continuous)
Current measurement range (pulsed) ⁽²⁾
Maximum pulse energy ⁽²⁾
A
A
-2000
J
± 600
900
2000
Current measurement accuracy
A
± 0.5 % + offset
Current measurement offset error max.
Current measurement resolution (see Table)
mA
-30
0
30
mA
0.715
91.5
VOLTAGE MEASUREMENT
Voltage measurement range
V
4
18
Voltage measurement accuracy
mV
-50
50
Voltage measurement resolution
mV
0.88
TEMPERATURE MEASUREMENT
Temperature measurement range
°C
-40
125
Temperature measurement accuracy (0 °C to 60 °C)
°C
±1
Temperature measurement accuracy (-20 °C to 100 °C)
°C
Temperature measurement accuracy (-40 °C to 115 °C)
°C
± 1.5
± 3.0
Temperature measurement resolution
°C
0.055
COMMUNICATION
LIN specification
LIN 2.1, 2.0
LIN baud rate
Data transfer rate (max.) ⁽³⁾
ADC sample rate (I, V, T)
bits/s
Hz
Hz
2000
10
20000
50
200
1000
CONNECTIONS
Resistor mounting holes
Four pin connector
0.276" dia, centered widthwise, 0.492" from end of shunt
Integral connector mates to standard Molex 33472-4001 female connector
Notes
(1) _{Typical depends on LIN transfer rate}
(2) _{Temperature as measured by the IBS may not exceed 115 °C}
(3) _{LIN bus constrained}
Revision: 05-Jan-17
3
Document Number: 30194
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000