DG604_11 Datasheet, PDF (2/12 Pages) Vishay Siliconix – 1.0 pC Charge Injection, 100 pA Leakage, 4-Channel Multiplexer

DG604
Vishay Siliconix
TRUTH TABLE
Enable
Input
L
H
H
H
H
Selected Input
A1
A0
X
X
L
L
L
H
H
L
H
H
On Switches
DG604
All Switches Open
D to S1
D to S2
D to S3
D to S4
ORDERING INFORMATION
Temp. Range
- 40 °C to 125 °C^a
Notes:
a. - 40 °C to 85 °C datasheet limits apply.
Package
14 pin TSSOP
16 pin miniQFN
Part Number
DG604EQ-T1-E3
DG604EN-T1-E4
ABSOLUTE MAXIMUM RATINGS T_A = 25 °C, unless otherwise noted
Parameter
Limit
Unit
V+ to V-
14
GND to V-
Digital Inputs^a, V_S, V_D
7
V
(V-) - 0.3 to (V+) + 0.3
or 30 mA, whichever occurs first
Continuous Current (Any Terminal)
Peak Current, S or D (Pulsed 1 ms, 10 % Duty Cycle)
30
mA
100
Storage Temperature
Power Dissipation (Package)^b
14 pin TSSOP^c
16 pin miniQFN^{d, e}
- 65 to 150
°C
450
mW
525
Thermal Resistance (Package)^b
14 pin TSSOP
16 pin miniQFN
178
C/W
152
Notes:
a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 5.6 mW/°C above 70 °C.
d. Derate 6.6 mW/°C above 70 °C.
e. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal
is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be
guaranteed and is not required to ensure adequate bottom side solder interconnection.
SPECIFICATIONS FOR DUAL SUPPLIES
Parameter
Analog Switch
Symbol
Test Conditions
Unless Otherwise Specified
V+ = 5 V, V- = - 5 V
V_{IN A0, A1 and ENABLE} = 2 V, 0.8 V^a
Analog Signal Range^e
V_ANALOG
On-Resistance
R_DS(on) I_S = 1 mA, V_D = - 3 V, 0 V, + 3 V
On-Resistance Match
R_ON
I_S = 1 mA, V_D = ± 3 V
On-Resistance Flatness R_FLATNESS I_S = 1 mA, V_D = - 3 V, 0 V, + 3 V
Temp.^b
Full
Room
Full
Room
Full
Room
Full
Typ.^c
70
1
10
- 40 °C to 125 °C - 40 °C to 85 °C
Min.^d Max.^d Min.^d Max.^d Unit
-5
5
-5
5
V
115
115
160
140
5
6.5
5
6.5

20
20
33
22
www.vishay.com
Document Number: 69934
2
S11-1429-Rev. C, 18-Jul-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000