ACAS0612_13 Datasheet, PDF (2/8 Pages) Vishay Siliconix – Precision Thin Film Chip Resistor Array

www.vishay.com
ACAS 0612 - Precision
Vishay Beyschlag
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits.
MAXIMUM RESISTANCE CHANGE AT RATED POWER ⁽¹⁾
DESCRIPTION
Configuration, isolated
Operation mode
Precision
Rated power per element, P₇₀
0.032 W
Rated power per packaging, P₇₀
0.1 W
Film temperature
85 °C
Operating voltage, U_max. AC/DC
Max. resistance change at P₇₀
R/R max., after:
1000 h
25 V
± 0.1 %
8000 h
Max. relative resistance change (relative drift) at P₇₀
R/R max., after:
1000 h
± 0.25 %
± 0.05 %
8000 h
± 0.125 %
Note
(1) _{Figures are given for arrays with equal values, design type AE.}
CIRCUITS
ACAS 0612
4 x 0603
Standard
0.1 W
0.3 W
125 °C
75 V
± 0.25 %
± 0.5 %
± 0.125 %
± 0.25 %
DESIGN
AE
TP
R₁
R₂
R₃
R₄
ACAS 0612
ACAS 0612
R₁ = R₂ = R₃ = R₄
R₁ = R₄ < R₂ = R₃
Revision: 12-Apr-13
2
Document Number: 28751
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000