UH10JT Datasheet, PDF (1/5 Pages) Vishay Siliconix – High Voltage Ultrafast Rectifier

New Product
UH10JT & UHF10JT
Vishay General Semiconductor
High Voltage Ultrafast Rectifier
TO-220AC
ITO-220AC
2
1
UH10JT
PIN 1
PIN 2
CASE
UHF10JT
PIN 1
PIN 2
2
1
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
t_rr
V_F at I_F = 10 A
T_J max.
10 A
600 V
90 A
25 ns
1.41 V
175 °C
FEATURES
• Oxide planar chip junction
• Ultrafast recovery time
• Soft recovery characteristics
• Low switching losses, high efficiency
• High forward surge capability
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in high voltage continuous mode power factor
correctors (CCM PFC), switching mode power
supplies, freewheeling diodes and secondary dc-to-dc
rectification application.
MECHANICAL DATA
Case: TO-220AC, ITO-220AC
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (T_C = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (Fig. 1)
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
V_RRM
I_F(AV)
I_FSM
Isolation voltage (ITO-220AC only)
from terminal to heatsink t = 1 min
V_AC
Operating junction and storage temperature range
T_J, T_STG
UH10JT
UHF10JT
600
10
90
1500
- 55 to + 175
UNIT
V
A
A
V
°C
-
ELECTRICAL CHARACTERISTICS (T_C = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TYP.
Instantaneous forward voltage ⁽¹⁾
I_F = 5 A
I_F = 10 A
T_A = 25 °C
V_F
I_F = 5 A
I_F = 10 A
T_A = 125 °C
1.70
2.5
1.15
1.41
MAX.
-
3.0
-
1.80
UNIT
V
Document Number: 88998 For technical questions within your region, please contact one of the following:
Revision: 25-Aug-08
[e-mail], [e-mail], [e-mail]
www.vishay.com
1