UG30APT-E3 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Ultrafast recovery time

UG30APT-E3, UG30BPT-E3, UG30CPT-E3, UG30DPT-E3
www.vishay.com
Vishay General Semiconductor
Dual Common Cathode Ultrafast Plastic Rectifier
3
2
1
TO-247AD (TO-3P)
PIN 1
PIN 3
PIN 2
CASE
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
t_rr
V_F at I_F
T_J max.
Package
30 A
50 V, 100 V, 150 V, 200 V
300 A
25 ns
0.85 V
150 °C
TO-247AD (TO-3P)
Diode variation
Common cathode
FEATURES
• Power pack
• Glass passivated pellet chip junction
• Ultrafast recovery time
• Low switching losses, high efficiency
• Low forward voltage drop
• High forward surge capability
• Solder dip 275 °C max., 10 s per JESD 22-B106
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency rectifier of switching mode power
supplies, inverters, freewheeling diodes, DC/DC converters,
and other power switching application.
MECHANICAL DATA
Case: TO-247AD (TO-3P)
Molding compound meets UL 94V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs max.
ELECTRICAL CHARACTERISTICS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL UG30APT UG30BPT UG30CPT
Max. repetitive peak reverse voltage
Max. RMS voltage
Max. DC blocking voltage
V_RRM
50
V_RMS
35
V_DC
50
100
150
70
105
100
150
Max. average forward rectified current at T_C = 120 °C
I_F(AV)
30
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load per diode
I_FSM
300
Operating and storage temperature range
T_J, T_STG
-65 to +150
UG30DPT
200
140
200
UNIT
V
V
V
A
A
°C
Revision: 24-Feb-16
1
Document Number: 88762
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000