SI9913_04 Datasheet, PDF (1/9 Pages) Vishay Siliconix – Half-Bridge MOSFET Driver for Switching Power Supplies

Si9913
Vishay Siliconix
Half-Bridge MOSFET Driver for Switching Power Supplies
FEATURES
D 4.5- to 5.5-V Operation
D Undervoltage Lockout
D 250-kHz to 1-MHz Switching Frequency
D Synchronous Switch Enable
D One Input PWM Signal Generates Both Drive
D Bootstrapped High-Side Drive
D Operates from 4.5- to 30-V Supply
D TTL/CMOS Compatible Input Levels
D 1-A Peak Drive Current
D Break-Before-Make Circuit
APPLICATIONS
D Multiphase Desktop CPU Supplies
D Single-Supply Synchronous Buck Converters
D Mobile Computing CPU Core Power Converters
D Standard-Synchronous Converters
D High Frequency Switching Converters
DESCRIPTION
The Si9913 is a dual MOSFET high-speed driver with
break-before-make. It is designed to operate in high frequency
dc-dc switchmode power supplies. The high-side driver is
bootstrapped to handle the high voltage slew rate associated
with “floating” high-side gate drivers. Each driver is capable
of switching a 3000-pF load with 60-ns propogation delay and
25-ns transition time. The Si9913 comes with internal
break-before-make feature to prevent shoot-through current in
the external MOSFETs. A synschronous enable pin is used to
enable the low-side driver. When disabled, the OUT_L is logic
low.
The Si9913 is available in both standard and lead (Pb)-free 8-pin
SOIC packages for operation over the industrial operation range
(−40_C to 85_C).
FUNCTIONAL BLOCK DIAGRAM AND TRUTH TABLE
V_DD
IN
SYN
D1
Level Shift
Undervoltage
V_DD
+
−
V_BBM
BOOT
Q₁
OUT_H
V_S
OUT_L
V_DC
C_BOOT
OUTPUT
Q₂
TRUTH TABLE
V_S SYN IN V_OUTL V_OUTH
L
L
L
L
L
L
L
H
L
H
L
H
L
H
L
L
H
H
L
H
H
L
L
L
L
H
L
H
L
H
H
H
L
L
L
H
H
H
L
H
GND
Document Number: 71343
S-40133—Rev. B, 16-Feb-04
www.vishay.com
1