DG200B Datasheet, PDF (1/6 Pages) Vishay Siliconix – Monolithic Dual SPST CMOS Analog Switch

DG200B
Vishay Siliconix
Monolithic Dual SPST CMOS Analog Switch
DESCRIPTION
The DG200B is a dual, single-pole, single-throw analog
switch designed to provide general purpose switching of
analog signals. This device is ideally suited for designs
requiring a wide analog voltage range coupled with low
on-resistance.
The DG200B is designed on Vishay Siliconix’ improved
PLUS-40 CMOS process. An epitaxial layer prevents
latchup.
Each switch conducts equally well in both directions when
on, and blocks up to 30 V peak-to-peak when off. In the on
condition, this bi-directional switch introduces no offset
voltage of its own.
FEATURES
• ± 15 V Input Signal Range
• 44 V Maximum Supply Ranges
• On-Resistance: 45 Ω
• TTL and CMOS Compatibility
BENEFITS
• Wide Dynamic Range
• Simple Interfacing
• Reduced External Component Count
APPLICATIONS
• Servo Control Switching
• Programmable Gain Amplifiers
• Audio Switching
• Programmable Filters
Pb-free
Available
RoHS*
COMPLIANT
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
Plastic Dip
IN_{2 1}
NC ₂
GND ₃
NC ₄
S_{2 5}
D_{2 6}
V– ₇
Top View
14 ^IN1
13 ^NC
12 ^{V+ Substrate}
11 ^NC
10 S1
9 ^D1
8 ^NC
TRUTH TABLE
Logic
0
1
Logic "0" ≤ 0.8 V
Logic "1" ≥ 2.4 V
Switch
ON
OFF
ORDERING INFORMATION
Temp Range
Package
- 40 to 85 °C
14-Pin Plastic DIP
Part Number
DG200BDJ
DG200BDJ-E3
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 71357
S-71155–Rev. C, 11-Jun-07
www.vishay.com
1