15536 Datasheet, PDF (1/13 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors

595D
Vishay Sprague
Solid Tantalum Chip Capacitors
TANTAMOUNT^® Conformal Coated, Maximum CV
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Capacitance Range: 0.1 µF to 1500 µF
FEATURES
• New extended range offerings
• Large capacitance rating range
Pb-free
• Terminations: Tin (2) standard
• 8 mm, 12 mm tape and reel packaging
available per EIA 481-1 and reeling per IEC
Available
RoHS*
COMPLIANT
286-3. 7" [178 mm] standard. 13" [330 mm] available
• Case code compatibility with EIA 535BAAC and
CECC30801 molded chips
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 4 WVDC to 50 WVDC
ORDERING INFORMATION
595D
106
X0
TYPE
CAPACITANCE
CAPACITANCE
TOLERANCE
010
DC VOLTAGE RATING
AT + 85 °C
A
2
CASE CODE TERMINATION
T
PACKAGING
This is expressed in
picofarads. The first two
digits are the significant
figures. The third is the
number of zeros to
follow.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an "R"
(6R3 = 6.3 volts).
See Ratings
and Case
Codes Table.
2 = 100 % Tin
4 = Gold Plated
8 = Solder
Plated (60/40)
Special Order
T = Tape and Reel
7" [178 mm] Reel
W = 13" [330 mm] Reel
See Tape and Reel
Specifications.
Note: Preferred Tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
DIMENSIONS in inches [millimeters]
W
L
B
D
A
Tantalum Wire
Nib Identifies
Anode (+)
Terminal
J
J
H
CASE
CODE
T
L (Max.)
0.087
[2.2]
W
0.045 ± 0.012
[1.1 ± 0.3]
H
0.045 ± 0.012
[1.1 ± 0.3]
A
0.016 ± 0.008
[0.4 ± 0.2]
B
0.042 ± 0.010
[1.07 ± 0.25]
S
0.126 ± 0.008
[3.2 ± 0.2]
0.067 ± 0.008
[1.7 ± 0.2]
0.051 ± 0.008
[1.3 ± 0.2]
0.031 ± 0.012 0.078 ± 0.012
[0.80 ± 0.30]
[2.0 ± 0.3]
A
0.146
[3.7]
0.072 ± 0.012
[1.8 ± 0.3]
0.056 ± 0.012
[1.4 ± 0.3]
0.031 ± 0.012 0.085 ± 0.016
[0.80 ± 0.30]
[2.2 ± 0.4]
B
0.158
[4.0]
0.110 + 0.012 - 0.016 0.075 + 0.012 - 0.024 0.031 ± 0.012 0.097 ± 0.016
[2.8 + 0.3 - 0.4]
[1.9 + 0.3 - 0.6]
[0.80 ± 0.30]
[2.5 ± 0.4]
C
0.281
[7.1]
0.126 ± 0.012
[3.2 ± 0.3]
0.098 ± 0.012
[2.5 ± 0.3]
0.051 ± 0.012 0.180 ± 0.024
[1.3 ± 0.30]
[4.6 ± 0.6]
G
0.205 ± 0.016
[5.2 ± 0.4]
0.144 ± 0.016
[3.65 ± 0.4]
0.087
[2.2] Max
0.051 ± 0.012 0.133 ± 0.016
[1.3 ± 0.3]
[3.4 ± 0.4]
H
0.205 ± 0.016
[5.2 ± 0.4]
0.181 ± 0.016
[4.6 ± 0.4]
0.078
[2.0] Max
0.051 ± 0.012 0.133 ± 0.016
[1.3 ± 0.30]
[3.4 ± 0.4]
D
0.293
[7.5]
0.170 ± 0.012
[4.3 ± 0.3]
0.110 ± 0.012
[2.8 ± 0.3]
0.051 ± 0.012 0.180 ± 0.024
[1.3 ± 0.30]
[4.6 ± 0.6]
M
0.129 ± 0.012
[3.3 ± 0.3]
0.106 ± 0.012
[2.7 ± 0.3]
0.067 ± 0.012
[1.7 ± 0.3]
0.031 ± 0.012 0.078 ± 0.012
[0.80 ± 0.3]
[2.0 ± 0.3]
R
0.283
[7.2]
0.235 ± 0.012
[6.0 ± 0.3]
0.136 ± 0.012
[3.5 ± 0.3]
0.051 ± 0.012 0.180 ± 0.024
[1.3 ± .30]
[4.6 ± 0.6]
Note: The anode termination (D less B) will be a minimum of 0.010" (0.3 mm). T Case = 0.005" (0.13 mm) minimum.
*Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
1
For technical questions, contact: [e-mail]
D (Ref.)
0.063
[1.6]
0.086
[2.2]
0.115
[2.9]
0.138
[3.5]
0.236
[6.0]
0.173
[4.4]
0.173
[4.4]
0.253
[6.4]
0.095
[2.5]
0.243
[6.2]
J (Max.)
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
Document Number: 40007
Revision: 16-Dec-05