LCAS6-10-L Datasheet, PDF (3/4 Pages) Vicor Corporation – VI CHIP Evaluation Board

Specifications, continued
+IN
C1
100 µF
63V
+In
+Out
TM
SG
Output scope connector
PC
–In
–Out
+OUT
–IN
PC
–OUT
SG
TM
Figure 2— V•I Chip evaluation board schematic
THERMALS
CAUTION
For most lab environments a fan is not required as long as the
The V•I Chip and evaluation board can comfortably operate at
P ^{R E L I M I N A RY airflow around the device is unobstructed. The temperature}
monitor function (TM) may be used to monitor the effective
junction temperature of the V•I Chip.
surface temperatures which may pose a thermal hazard to the
operator. Be careful not to touch any exposed surface. Certain
V•I Chips may operate at potentially dangerous voltages, use
care in such cases. This evaluation PCB is not intended for use
in end item equipment.
+ IN
+ OUT
– IN
– OUT
Figure 3— Paralleling connections
45
Vicor Corporation Tel: [phone] vicorpower.com V•I Chip Evaluation Board
Rev. 1.2
Page 3 - 4