VS-500 Datasheet, PDF (8/8 Pages) Vectron International, Inc – Voltage Controlled SAW Oscillator

VS-500 Voltage Controlled SAW Oscillator
Standard Frequencies (MHz)
155.5200
167.3316
627.3296
669.6429
716.5372
781.2500
156.2500
177.7371
629.9878
670.8386
718.7500
805.6641
159.3750
311.0400
644.5313
672.1627
719.7344
Other Frequencies Available Upon Request.
Ordering Information
161.1328
622.0800
657.4219
690.5692
748.0709
164.3555
624.7048
666.5143
693.4830
750.0000
VS - 500 - L F F - G N N – xxx.xxx
166.6286
625.0000
669.3266
693.7500
779.5686
Product Family
VS: VCSO
Frequency (See Above)
155 – 850 MHz
Package
500: 9 x 14 x 4.5 mm
Input
L: 3.3 V
K: 5.0V ¹
Other (Future Use)
N: N/A
Output
E: ECL²
F: PECL
Operating Temperature
F: -40 to 85 °C
Other (Future Use)
N: N/A
Absolute Pull Range
G: +/- 50 ppm
H: +/- 100 ppm
1_{For all new 5.0V supply requirements, PECL output configuration is suggested.} 2_{ECL “E” Is Only Available In 5.0V}
“K” Configuration and is offered to make the Vc Input Impedance backward compatible with the VS-500A & VS-500F
products. For further information, please contact your local Vectron Marketing Representative.
Part Number Cross Reference
Old Part Number
VS-500A
VS-500F
New Part Number
VS-500-KEF-GNN
VS-500-KEF-HNN
For Additional Information, Please Contact:
USA: Vectron International, 267 Lowell Rd, Hudson, NH 03051 . . . . Tel: 1-88-VECTRON-1
Fax: 1-888-FAX-VECTRON
EUROPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: [phone] Fax: [phone]
ASIA: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: [phone] Fax: [phone]
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Tel: 1-88-VECTRON-1 Website: www.vectron.com
Page 8 of 8
Rev: 14Nov03