VS-500 Datasheet, PDF (1/8 Pages) Vectron International, Inc – Voltage Controlled SAW Oscillator

VS-500
Voltage Controlled SAW Oscillator
Features
• Improved High Performance ASIC
• Industry Standard Package, 9 x 14 x 4.5 mm
• Output Frequencies from 155 MHz to 850 MHz
• 3.3 V or 5.0 V Operation
• At 155.52 MHz, Jitter < 0.50 ps-rms (12 kHz to 20 MHz)
• At 622.08 MHz, Jitter < 0.30 ps-rms (50 kHz to 80 MHz)
• LV-PECL, PECL, or ECL Configurations
• Complementary Outputs
• Output Disable Feature
Vcc
COutput Output
SAW
Applications
PLL circuits for Clock Smoothing and Frequency Translation
Description
Standard
• 10G Fibre Channel
• 10GbE LAN / WAN
• OC-192
• SONET / SDH
INCITS/T11 Project 1413-D
IEEE 802.3ae
ITU-T G.709
GR-253-CORE Issue3
Vc
OD
Gnd
Description
The VS-500 is a SAW based voltage controlled oscillator that
operates at the fundamental frequency of the internal SAW filter.
This resonator is a high Q quartz device that enables the circuit
to achieve low phase jitter performance over a wide operating
temperature range. The oscillator is housed in a hermetically
sealed J-lead surface mount package offered on tape and reel.
It has an output disable to facilitate on-board testing.
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Page 1 of 8
Tel: 1-88-VECTRON-1
Website: www.vectron.com
Rev: 14Nov03