CS300 Datasheet, PDF (5/8 Pages) Vectron International, Inc – Clock Smoother

The Standard ship method for volume production of the CS-300 series is in a matrix tray. These
trays are 100% recyclable. The trays also offer the added feature that they can be continuously
feed into a pick-n-place machine eliminating the down time required with tape-n-reel.
0.235
0.255“deep
12 15/16
VI - Logo ^0.235
This Cell only
0.125
4.00
0.125
1.05
0.125
0.85
0.16
3 x 12 Array / 36 units per tray
Pin 1
This Corner
Although protection circuitry has been
designed into this device, proper precautions
should be taken to avoid exposure to
electrostatic discharge (ESD) during handling
and mounting. VI employs a human-body
model (HBM) and a charged-device model
(CDM) for ESD-susceptibility testing and
protection design evaluation. ESD voltage
thresholds are dependent on the circuit
parameters used to define the mode.
Although no industry-wide standard has been
adopted for the CDM, a standard HBM
(resistance = 1500 ohms, capacitance =
100pf) is widely used and therefore can be
used for comparison purposes. The HBM
ESD threshold presented here was obtained
by using these circuit parameters.
ESD Threshold Voltage
Model
Threshold
Human-Body (HBM)
500
Charged-Device
500
Unit
V min
V min