CS300 Datasheet, PDF (4/8 Pages) Vectron International, Inc – Clock Smoother

mm
(in)
2.54
(0.10)
1.91
(0.075)
19.05
(0.75)
9.53
(0.375)
8.89
(0.35)
17.78
(0.70)
Temperature ( ºC)
3.04
(0.12)
pre-heating
60 to 90 sec.
@ 140ºC to 160ºC
reflow
40 to 60 sec.
@ >183ºC
NOTE: The CS-300 should not be subjected to a wash process that will immerse it in solvents. NO CLEAN is the recommended
procedure. The CS-300 has been designed for pick and place reflow soldering. The suggested reflow profile is shown above.
The CS-300 may be reflowed once, and should not be reflowed in the inverted position.