FX-400-EAE-K Datasheet, PDF (2/9 Pages) Vectron International, Inc – Low Jitter Frequency Translator

Performance Specifications
Parameter
Frequency ^{1, 2, 3}
Input Frequency
Capture Range
Output Frequency
Supply
Voltage ^{2, 3}
Current (No Load)³
Input Signal ^{2, 3}
LVCMOS
LVDS
LVPECL
LVCMOS Output (Option A) ^{2, 3}
Differential Output (Options C and D) ^{2, 3, 4, 5}
Mid Level - LVPECL
Swing - LVPECL
Mid Level - LVDS
Swing - LVDS
Rise Time
Fall Time
Symmetry
SSB Phase Noise, Fout = 155.52/622.08 ^{5, 6}
10Hz Offset
100Hz Offset
1kHz Offset
10kHz Offset
100kHz Offfset
1 MHz Offset
10 MHz Offset
Jitter Generation ^{5, 6}
155.52 MHz (12kHz - 20MHz BW)
622.08 MHz (12kHz - 20 MHz BW)
Operating Temperature (Options T of E) ^{1 ,3}
Table 1. Electrical Performance
Symbol
Min
Typical
Maximum
F
0.008
IN
APR
±40
F
1.544
OUT
800
1000
V
3.13
3.3
3.46
CC
I_CC
60
100
F
CMOS
IN
F
LVDS
IN
F
LVPECL
IN
LVCMOS
V -1.4
CC
450
V -1.25
CC
600
V -1.0
CC
950
V -2.4
CC
250
V -2.3
CC
410
V -2.5
CC
450
t_R
0.5
t
0.5
F
SYM
45
50
55
Φ
-64/-27
n
Φ
-95/-55
n
Φ
-123/-123
n
Φ
-143/-110
n
Φ
-146/-130
n
Φ
-146/-146
n
Φ
-146/-146
n
Φ
0.30
J
Φ
0.12
J
T
0 to 70 or -40 to 85
OP
Units
MHz
ppm
MHz
V
mA
V
mV p-p
V
mV p-p
ns
ns
%
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ps RMS
ps RMS
0C
1. See Standard Frequencies and Ordering Information.
2. Parameters are tested with production test circuit below (Fig 2).
3. Parameters are tested at ambient temperature with test limits guard-banded for specified operating temperature.
4. Measured from 20% to 80% of a full output swing (Fig 3).
5. Not tested in production, guaranteed by design, verified at qualification.
6. The FX-400 phase noise and jitter performance can be optimized for specific applications. Please consult with Vectron’s Application Engineers
for more information.
Page 2 of 9
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Rev: 01Apr2009