CHE1260-QAG Datasheet, PDF (9/10 Pages) United Monolithic Semiconductors – 12-27GHz Bidirectionnal Detector

12-27GHz Detector
Notes
CHE1260-QAG
100kΩ
Vref_R ^DC_R Vdet_R _100kΩ
RF_F__{_}i_in_n
R^RF^F_^_o^ou^ut^t
100kΩ
Vdet_I _{DC_I} Vref_I
100kΩ
Recommended external resistors assembly
100kΩ resistors in parallel with Vdet_I, Vref_I, Vdet_R and Vref_R pads are recommended to
provide the best behaviour in the whole operating temperature range.
As the voltage detection is the difference between Vref_X and Vdet_X (X= I or R), the
external resistor value should be identical on these ports.
For information, a variation of 2% leads around 1mV variation of detected voltage.
ESD protections are implemented on Vdet_I, Vref_I, Vdet_R and Vref_R accesses.
The DC connections (DC_R & DC_I) do not include any decoupling capacitor in package,
therefore it is mandatory to provide a good external DC decoupling on the PC board, as
close as possible to the package.
Ref: DSCHE1260-QAG8057 - 22 Feb 08
9/10
Specifications subject to change without notice
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: [phone] - Fax: [phone]