TGS4310_15 Datasheet, PDF (6/9 Pages) TriQuint Semiconductor – 13-19GHz 5W SPDT Switch

Application Circuit
J2
RF1 (Output 1)
2
TGS4310
13-19GHz 5W SPDT Switch
J1
1
RFC (Input)
3
VBIT
4
VDD
5
J3
RF2 (Output 2)
This switch can be configured as a Single Pole, Single Throw (SPST) by terminating one
unused RF (pad 2 or pad 5) switched port with a 50 Ohm load.
Function Table
RF Path
RFC (Input) to RF1 (Output1)
RFC (Input) to RF2 (Output 2)
State
On-State (Insertion Loss)
Off-State (Isolation)
On-State (Insertion Loss)
Off-State (Isolation)
V_DD (V)
7
7
7
7
V_BIT (V)
0
7
7
0
Preliminary Datasheet: Rev - 07-18-14
© 2014 TriQuint
- 6 of 9 -
Disclaimer: Subject to change without notice
www.triquint.com