TLBF1108A Datasheet, PDF (7/12 Pages) Toshiba Semiconductor – General Lighting

10.3. Land Pattern Dimensions for Reference Only
Cu area > 16 mm² (The following Cu area shows an example of the dimensions.)
TLBF1108A(T11
Fig. 10.3.1 Land Pattern Dimensions for Reference Only (Unit: mm)
11. Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. It is confirmed
that these solvents have no effect on semiconductor devices in our dipping test (under the recommended
conditions). In selecting the one for your actual usage, please perform sufficient review on washing condition,
using condition and etc.
Recommended cleaning solvents
ASAHI CLEAN AK-225AES: (made by ASAHI GLASS)
KAO CLEANTHROUGH 750HS: (made by KAO)
PINE ALPHA ST-100S: (made by ARAKAWA CHEMICAL)
7
2012-02-24
Rev.2.0