TLBF1108A Datasheet, PDF (2/12 Pages) Toshiba Semiconductor – General Lighting

TLBF1108A(T11
4. Absolute Maximum Ratings (Note) (Unless otherwise specified, T_a = 25)
Characteristics
Symbol
Note
Max
Unit
Forward current (DC)
I_F
See Fig. 4.1
50
mA
Reverse voltage
V_R
5
V
Power dissipation
P_D
215
mW
Operating temperature
T_opr
-40 to 100

Storage temperature
T_stg
-40 to 100

Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Fig. 4.1 Forward Current Derating, I_F - T_a
5. Handling Precautions
• ESD withstand voltage according to MIL STD 883D, Method 3015.7: ≥ 1000 V
When handling this LED, take the following measures to prevent the LED from being damaged or
otherwise adversely affected.
1. Use a conductive tablemat and conductive floor mat, and ground the workbench and floor.
2. Operators handling laser diodes must be grounded via a high resistance (about 1 MΩ). A conductive
strap is good for this purpose.
3. Ground all tools including soldering irons.
• Since this product is intended to be used for display lighting, the measurement standard is based on the
spectral sensitivity of the human eye. It is not intended to be used for any applications other than display
lighting (e.g., sensors and light communications systems.)
2
2012-02-24
Rev.2.0