TMP1962F10AXBG Datasheet, PDF (27/108 Pages) Toshiba Semiconductor – 32-Bit RISC Microprocessor

TMP1962F10AXBG
(5) Continue executing the flash programming routine to download new program code from the host
controller and program it into the erased flash block. Once programming is complete, turn on the
protection of that flash block.
TMP1962F10AXBG
Flash Memory
New Application
Program Code
[Reset Procedure]
(a) Mode Judgment Routine
(b) Programming Routine
(c) Copy Routine
Host Controller
I/O
New Application
Program Code
(b) Programming Routine
RAM
(6) Drive RESET low to reset the TMP1962F10AXBG. Upon reset, the on-chip flash memory is put in
Normal mode. After RESET is released, the CPU will start executing the new application program
code.
Host Controller
TMP1962F10AXBG
Flash Memory
New Application
Program Code e
[Reset Procedure]
(a) Mode Judgment Routine
(b) Programming Routine
(c) Copy Routine
(I/O)
RAM
0 → 1 RESET
Set to
Normal mode
TMP1962F-26