TA1241ANG Datasheet, PDF (23/30 Pages) Toshiba Semiconductor – DEFLECTION PROCESSOR IC FOR TVs

TA1241ANG
No.
CHARACTERISTIC
36
Center Curve Saw Negative
Correction Maximum Amplitude
SYMBOL UNIT
V_CSR
V_p-p
ELECTRICAL
CHARACTERISTICS
LIMITS
MIN TYP. MAX
TEST METHOD (CONDITIONS V_CC = 9 V, Ta = 25±3°C)
BUS DATA AND SWITCHING MODE
[ ] ; SUBADDRESS, ( ) ; DATA
TEST METHOD
As above, measure the TP18 output amplitude when
set the data of subaddress [0E] to (40).
3.2
3.6
4.0
[08] adjustment, all SW-A
[0E] (40)
37
Center Curve Parabola Positive
Correction Maximum Amplitude
V_CPF
V_p-p
1.2
1.8
2.4
[08] adjustment, all SW-A
[0E] (74)
(1) Same as 12 above.
(2) Measure the TP18 output amplitude when set the
data of subaddress [0E] to (74).
38
Center Curve Parabola Negative
Correction Maximum Amplitude
V_CPR
V_p-p
1.2
1.8
2.4
[08] adjustment, all SW-A
[0E] (04)
As above, measure the TP18 output amplitude when
set the data of subaddress [0E] to (04).
39
Horizontal Centering Maximum
Output Voltage
40
Horizontal Centering Minimum
Output Voltage
41
Vertical Centering Maximum
Output Voltage
42
Vertical Centering Minimum
Output Voltage
43
Dynamic Focus Correction
Maximum Output Voltage
V_H11
V_L11
V_H17
V_L17
V_H19
V
4.8 5.0 5.2 [09] (40), all SW-A
V
0.5 1.3 2.1 All PRESET values, all SW-A
V
4.8 5.0 5.2 [0B] (4F), all SW-A
V
0.0 5.0 1.6 All PRESET values, all SW-A
V
4.8 5.0 5.2 [0F] (3F), all SW-A
Measure the TP11 voltage V_H11 when set the data of
subaddress [09] to (70).
Measure the TP11 voltage V_L11 when set the data of
subaddress [09] to (00).
Measure the TP17 voltage V_H17 when set the data of
subaddress [0B] to (7F).
Measure the TP17 voltage V_L17 when set the data of
subaddress [0B] to (00).
Measure the TP19 voltage V_H19 when set the data of
subaddress [0F] to (3F).
Note: Unless otherwise specified in the bus data and SW mode column, use PRESET values
and SW-A.
23
2005-08-18