English
Language : 

TLP141G_07 Datasheet, PDF (2/6 Pages) Toshiba Semiconductor – Photo−Transistor Programmable Controllers
Absolute Maximum Ratings (Ta = 25°C)
TLP141G
Characteristic
Symbol
Rating
Unit
Forward current
Forward current derating (Ta ≥ 53°C)
Peak forward current (100 μs pulse, 100 pps)
Reverse voltage
Junction temperature
Peak forward voltage(RGK = 27kΩ)
Peak reverse voltage(RGK = 27kΩ)
On−state current
On−state current derating (Ta ≥ 25°C)
Peak one cycle surge current
Peak reverse gate voltage
Junction temperature
Storage temperature range
Operating temperature range
Lead soldering temperature (10 s)
Isolation voltage (AC, 1 min., RH ≤ 60%) (Note 1)
IF
ΔIF/°C
IFP
VR
Tj
VDRM
VDRM
IT(RMS)
ΔIT / °C
ITSM
VGM
Tj
Tstg
Topr
Tsol
BVS
50
−0.7
1
5
125
400
400
150
−2.0
2
5
100
−55~125
−55~100
260
2500
mA
mA / °C
A
V
°C
V
V
mA
mA / °C
A
V
°C
°C
°C
°C
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note 1) Device considered a two terminal device: pins 1 and 3 shorted together and pins 4, 5 and 6 shorted
together.
Recommended Operating Conditions
Characteristic
Symbol
Min. Typ. Max. Unit
Supply voltage
Forward current
Operating temperature
Gate to cathode resistance
Gate to cathode capacitance
VAC
IF
Topr
RGK
CGK
―
― 120 Vac
15
20
25
mA
−25
―
85
°C
―
27
33
kΩ
―
0.01 0.1
μF
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2007-10-01