DS92LV0421_14 Datasheet, PDF (9/49 Pages) Texas Instruments – 10 - 75 MHz Channel Link II Serializer/Deserializer with LVDS Parallel Interface

DS92LV0421, DS92LV0422
www.ti.com
SNLS325C – MAY 2010 – REVISED APRIL 2013
DC Electrical Characteristics^{(1)(2)(3)(4)(5)(6)}
Over recommended operating supply and temperature ranges unless otherwise specified.
Parameter
Test Conditions
Pin/Freq.
Min
DS92LV0421 LVCMOS INPUT DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
I_IN
Input Current
V_DDIO = 3.0 to 3.6V
V_DDIO = 1.71 to 1.89V
V_DDIO = 3.0 to 3.6V
V_DDIO = 1.71 to 1.89V
V_IN = 0V or V_DDIO
V_DDIO = 3.0
to 3.6V
V_DDIO = 1.7
to 1.89V
PDB,
VODSEL,
MAPSEL,
CONFIG[1:0]
,BISTEN
2.0
0.65*
V_DDIO
GND
GND
−15
−15
DS92LV0422 LVCMOS I/O DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
I_IN
Input Current
V_DDIO = 3.0 to 3.6V
V_DDIO = 1.71 to 1.89V
V_DDIO = 3.0 to 3.6V
V_DDIO = 1.71 to 1.89V
V_IN = 0V or V_DDIO
V_DDIO = 3.0
to 3.6V
V_DDIO = 1.7
to 1.89V
PDB,
VODSEL,
OEN,
MAPSEL,
LFMODE,
SSC[2:0],
BISTEN
2.0
0.65*
V_DDIO
GND
GND
−15
−15
V_OH
High Level Output Voltage
I_OH = -0.5 mA
V_DDIO –
0.2
V_OL
Low Level Output Voltage
I_OL = +0.5 mA
I_OS
Output Short Circuit Current
V_OUT = 0V
V_DDIO = 3.0 to
3.6 V
V_DDIO = 1.71
to 1.89V
LOCK,
PASS
PDB = 0V, OSS_SEL
V_DDIO = 3.0 to
3.6 V
-10
I_OZ
TRI-STATE Output Current
= 0V, V_OUT = 0V or
V_DDIO
V_DDIO = 1.71
to 1.89V
-15
Typ
±1
±1
±1
±1
V_DDIO
GND
-10
-3
Max
V_DDIO
V_DDIO
0.8
0.35*
V_DDIO
+15
+15
V_DDIO
V_DDIO
0.8
0.35*
V_DDIO
+15
+15
0.2
+10
+15
Units
V
V
V
V
μA
μA
V
V
V
V
μA
μA
V
V
mA
μA
(1) Specification is verified by characterization and is not tested in production.
(2) Specification is verified by design and is not tested in production.
(3) The Electrical Characteristics tables list verified specifications under the listed Recommended Operating Conditions except as otherwise
modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not
verified.
(4) Typical values represent most likely parametric norms at V_DD = 3.3V, Ta = +25°C, and at the Recommended Operation Conditions at
the time of product characterization and are not verified.
(5) Current into device pins is defined as positive. Current out of a device pin is defined as negative. Voltages are referenced to ground
except VOD, ΔVOD, VTH and VTL which are differential voltages.
(6) When the device output is at TRI-STATE the Deserializer will lose PLL lock. Resynchronization / Relock must occur before data transfer
require t_PLD
Copyright © 2010–2013, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Links: DS92LV0421 DS92LV0422