TMS570LS3137-EP_15 Datasheet, PDF (84/157 Pages) Texas Instruments – 16- and 32-Bit RISC Flash Microcontroller

TMS570LS3137-EP
SPNS230D – OCTOBER 2013 – REVISED FEBRUARY 2015
www.ti.com
31
0
Update
compare
RTIUDCPy
From counter
block 0
From counter
block 1
+
31
0
Compare
RTICOMPy
Compare
control
DMAREQy
INTy
Figure 6-18. Compare Block Diagram
6.17.3 Clock Source Options
The RTI module uses the RTI1CLK clock domain for generating the RTI time bases.
The application can select the clock source for the RTI1CLK by configuring the RCLKSRC register in the
System module at address 0xFFFFFF50. The default source for RTI1CLK is VCLK.
For more information on clock sources refer to Table 6-8 and Table 6-13.
6.17.4 Network Time Synchronization Inputs
The RTI module supports 4 Network Time Unit (NTU) inputs that signal internal system events, and which
can be used to synchronize the time base used by the RTI module. On this device, these NTU inputs are
connected as shown below.
NTU Input
0
1
2
3
Table 6-34. Network Time Synchronization Inputs
Source
Macrotick
Start of Cycle
PLL2 Clock output
EXTCLKIN1 clock input
84
System Information and Electrical Specifications
Copyright © 2013–2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS570LS3137-EP