HD3SS3411-Q1 Datasheet, PDF (8/23 Pages) Texas Instruments – One Channel Differential 2:1 Mux/Demux

HD3SS3411-Q1
SLASE82A – JUNE 2015 – REVISED JULY 2015
www.ti.com
8.4 Device Functional Modes
The OEn control pin selects the functional mode of HD3SS3411-Q1. To enter standby/shutdown mode, the OEn
control pin is pulled high through a resistor and must remain high. For active/normal operation, the OEn control
pin should be pulled low to GND or dynamically controlled to switch between H or L.
Table 2. Device Power Modes
OEn
L
H
Device State
Normal
Shutdown
Signal Pins
Normal
Tri-stated
8
Submit Documentation Feedback
Product Folder Links: HD3SS3411-Q1
Copyright © 2015, Texas Instruments Incorporated