DS100KR800 Datasheet, PDF (8/33 Pages) Texas Instruments – Ultra Low Power, 8-Channel Repeater for Data-rates up to 10.3 Gbps

Symbol
Parameter
Conditions
Min
Typ
Max
Units
Equalization
DJE1
Residual deterministic 35” 4 mil FR4,
jitter at 10.3 Gbps
VID = 0.8 Vp-p,
PRBS15, EQ = 1F'h,
0.3
UI
DEM = 0 dB
DJE2
Residual deterministic 10 meters 30 awg cable,
jitter at 10.3 Gbps
VID = 0.8 Vp-p,
PRBS15, EQ = 2F'h,
DEM = 0 dB
0.3
UI
De-emphasis
DJD1
Residual deterministic 20” 4mils FR4,
jitter at 10.3 Gbps
VID = 0.8 Vp-p,
PRBS15, EQ = 00,
VOD = 1.0 Vp-p,
0.1
UI
DEM = −9 dB
Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability
and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in
the Recommended Operating Conditions is not implied. The Recommended Operating Conditions indicate conditions at which the device is functional and the
device should not be operated beyond such conditions. Absolute Maximum Numbers are guaranteed for a junction temperature range of -40°C to +125°C. Models
are validated to Maximum Operating Voltages only.
Note 2: Typical values represent most likely parametric norms at VDD = 2.5V, TA = 25°C., and at the Recommended Operation Conditions at the time of product
characterization and are not guaranteed.
Note 3: The Electrical Characteristics tables list guaranteed specifications under the listed Recommended Operating Conditions except as otherwise modified
or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not guaranteed.
Note 4: Allowed supply noise (mVp-p sine wave) under typical conditions.
Note 5: Guaranteed by device characterization.
Note 6: Propagation Delay measurements will change slightly based on the level of EQ selected. EQ = 00 will result in the shortest propagation delays.
www.ti.com
8