English
Language : 

CC430F5133 Datasheet, PDF (73/121 Pages) Texas Instruments – MSP430™ SoC with RF Core
www.ti.com
ECCN 5E002 TSPA - Technology / Software Publicly Available
CC430F613x
CC430F612x
CC430F513x
SLAS554F – MAY 2009 – REVISED DECEMBER 2011
Current Consumption, Receive Mode
TA = 25°C, VCC = 3 V (unless otherwise noted)(1) (2)
PARAMETER
FREQ
(MHz)
DATA
RATE
(kBaud)
TEST CONDITIONS
Input at -100 dBm (close to
sensitivity limit)
1.2
Input at -40 dBm (well above
sensitivity limit)
Input at -100 dBm (close to
Register settings
sensitivity limit)
315
38.4 optimized for reduced
current
Input at -40 dBm (well above
sensitivity limit)
Input at -100 dBm (close to
sensitivity limit)
250
Input at -40 dBm (well above
sensitivity limit)
Input at -100 dBm (close to
sensitivity limit)
1.2
Input at -40 dBm (well above
sensitivity limit)
Input at -100 dBm (close to
Current
Register settings
sensitivity limit)
consumption,
433
38.4 optimized for reduced
RX
current
Input at -40 dBm (well above
sensitivity limit)
Input at -100 dBm (close to
sensitivity limit)
250
Input at -40 dBm (well above
sensitivity limit)
Input at -100 dBm (close to
sensitivity limit)
1.2
Input at -40 dBm (well above
sensitivity limit)
868, 915
Input at -100 dBm (close to
Register settings
sensitivity limit)
38.4 optimized for reduced
current (3)
Input at -40 dBm (well above
sensitivity limit)
Input at -100 dBm (close to
sensitivity limit)
250
Input at -40 dBm (well above
sensitivity limit)
MIN TYP MAX UNIT
17
16
17
16
18
16.5
18
17
18
mA
17
18.5
17
16
15
16
15
16
15
(1) All measurement results are obtained using the EM430F6137RF900 with BOM according to tested frequency range (see Table 48).
(2) Reduced current setting (MDMCFG2.DEM_DCFILT_OFF = 1) gives a slightly lower current consumption at the cost of a reduction in
sensitivity. See tables "RF Receive" for additional details on current consumption and sensitivity.
(3) For 868/915 MHz, see Figure 21 for current consumption with register settings optimized for sensitivity.
Copyright © 2009–2011, Texas Instruments Incorporated
Submit Documentation Feedback
73